Return
to Cascade

Alder Cabinet

Alder Cabinet

CBT

CBT is a 66.6% Clear Two Face cuttings grade.

CBT grade Alder is a better quality grade which is graded for two face cuttings. It is best used in applications where both faces are seen like chair backs, cabinet doors, etc.
Length Specs:
  • 6′ (1.83m) minimum
Width Specs:
  • 4″ (101.6mm) minimum
  • With up to 5% narrows
Cutting Specs:
  • 3″ x 3′ (76mm x 76mm), or 4″ x 2′ (101mm x 609.6mm)
  • No limit to the number of cuttings allowed
6’1″ 7’1″ 8’1″ 10’1″ 12’1″
13/16
4/4
5/4
6/4
8/4
Notes:
  • Widths: 4″ and wider, of which 5% of 3″ width is admitted. Lengths: 6′ and longer
  • There is no limit to the number of cuttings.
  • Minimum Size Cuttings: 4″ wide by 2′ long or 3″ wide by 3′ long. The grade shall be determined from the worst face of the board. Admits pieces of 1′ and over surface measure that will not yield less than 66 2/3% (8/12) clear-2 face cuttings.
  • Cabinet admits all boards two board feet and over surface measure, yielding no less than 66.6% Clear Two Face cuttings.
  • Boards are graded from the poorer face.
  • Side bend is limited to 1″ (25mm). Pin knots are not considered defect.
Notes:
  • Widths: 4″ and wider, of which 5% of 3″ width is admitted. Lengths: 6′ and longer
  • There is no limit to the number of cuttings.
  • Minimum Size Cuttings: 4″ wide by 2′ long or 3″ wide by 3′ long. The grade shall be determined from the worst face of the board. Admits pieces of 1′ and over surface measure that will not yield less than 66 2/3% (8/12) clear-2 face cuttings.
  • Cabinet admits all boards two board feet and over surface measure, yielding no less than 66.6% Clear Two Face cuttings.
  • Boards are graded from the poorer face.
  • Side bend is limited to 1″ (25mm). Pin knots are not considered defect.

Virtual Unit Tour

Sample A

Front – Front Cuts – Back Face

Sample B

Front – Front Cuts – Back Face

Sample A

Front – Front Cuts – Back Face

Sample B

Front – Front Cuts – Back Face